Show Lldp Neighbors - Cisco Sx350 Cli Manual

36
789
Port Capabilities
------ -------------- -------------- ---------- -------------
gi11 Yes
gi12 Yes
gi13 No
Example 2 - The following example displays the LLDP MED configuration for
switchxxxxxx# show lldp med configuration gi11
Port Capabilities
------- -------------- ---------------- --------- ----------
gi11 Yes
Network policies:
Location:
Civic-address: 61:62:63:64:65:66

36.27 show lldp neighbors

To display information about neighboring devices discovered using LLDP, use the
show lldp neighbors Privileged EXEC mode command. The information can be
displayed for all ports or for a specific port.
Syntax
show lldp neighbors
Parameters
interface-id—(Optional) Specifies a port ID.
Default Configuration
If no port ID is entered, the command displays information for all ports.
Command Mode
Privileged EXEC mode
Link Layer Discovery Protocol (LLDP) Commands
Network Policy Location
Yes Yes
Yes No
No No
Network Policy Location
Yes Yes
[interface-id]
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Notifications Inventory
--------
Enabled Yes
Enabled No
Enabled No
Notifications Inventory
--------
Enabled Yes
1.
gi1