Show Event Manager Policy - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show event manager policy

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show event manager policy
To display the registered Embedded Event Manager (EEM) policies, use the show event manager policy
command.
Syntax Description detail
policy-name
inactive
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples The following example shows how to display the EEM policies:
switch# show event manager policy
switch
Related Commands Command
event manager applet
Cisco MDS 9000 Family Command Reference
22-84
show event manager policy [detail] [policy-name | inactive]
(Optional) Displays details of all policies.
(Optional) Specifies a policy-name policy to display.
(Optional) Displays only those policies that are inactive.
Modification
This command was introduced.
Description
Displays an applet with the Emedded Event manager.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x