Configuring Embedded Event Manager; Understanding Embedded Event Manager - Cisco 3032 Software Configuration Manual

Hide thumbs Also See for 3032:

Table of Contents

Configuring Embedded Event Manager

This chapter describes how to use the embedded event manager (EEM) to monitor and manage the switch

and how to configure it. Unless otherwise noted, the term switch refers to a standalone switch or a switch

For complete syntax and usage information for the commands used in this chapter, see the command

reference for this release and the Cisco IOS Network Management Command Reference. For complete

configuration information, see the Cisco IOS Network Management Configuration Guide, Release 12.4T.

This chapter consists of these sections:

The embedded event manager (EEM) monitors key system events and then acts on them through a set

policy. This policy is a programmed script that you can use to customize a script to invoke an action

based on a given set of events occurring. The script generates actions such as generating custom syslog

or Simple Network Management Protocol (SNMP) traps, invoking CLI commands, forcing a failover,

and so forth. The event management capabilities of EEM are useful because not all event management

can be managed from the switch and because some problems compromise communication between the

switch and the external network management device. Network availability is improved.if automatic

recovery actions are performed without rebooting the switch,

and the event subscribers (policies). The event publishers screen events and when there is a match on an

event specification that is provided by the event subscriber. Event detectors notify the EEM server when

an event occurs. The EEM policies then implement recovery based on the current state of the system and

the actions specified in the policy for the given event.

Understanding Embedded Event Manager, page 33-1

Configuring Embedded Event Manager, page 33-5

Displaying Embedded Event Manager Information, page 33-7

shows the relationship between the EEM server, the core event publishers (event detectors),

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide

C H A P T E R

Table of Contents