Show Event Manager Environment - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show event manager environment

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show event manager environment
To display the name and value of Embedded Event Manager (EEM) environment variables, use the show
event manager environment command.
Syntax Description variable-name
all
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples The following example shows all the EEM environment variable:
switch# show event manager environment all
switch#
Related Commands Command
event manager
environment
Cisco MDS 9000 Family Command Reference
22-82
show event manager environment {variable-name | all}
Displays information about the specified environment variable
Displays information about all environment variables.
Modification
This command was introduced.
Description
Displays an EEM environment variable.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x