Show Cfs - Cisco MDS 9124 - Fabric Switch Reference

show cfs

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show cfs
To display Cisco Fabric Services (CFS) information, use the show cfs command.
Syntax Description application
name app-name
lock
merge status
peers
status
Defaults None.
Command Modes EXEC mode.
Command History Release
2.0(1b)
2.1(1a)
3.0(1)
Usage Guidelines
None.
Examples
The following example shows how to display CFS physical peer information for all applications.
switch# show cfs peers
Physical Fabric
--------------------------------------------------
Switch WWN
--------------------------------------------------
20:00:00:05:30:00:61:de
20:00:00:0d:ec:08:66:c0
20:00:00:05:30:00:f1:e2
20:00:00:05:30:00:eb:46
Cisco MDS 9000 Family Command Reference
22-22
show cfs {application [name app-name] | lock [name app-name] | merge status name app-name]
| peers [name app-name] | status [name app-name]}
Displays locally registered applications.
Specifies a local application information by name. Maximum length is 64
characters.
Displays the state of application logical or physical locks.
Displays CFS merge information.
Displays logical or physical CFS peers.
Displays if CFS distribution is enabled or disabled. Enabled is the default
configuration.
Modification
This command was introduced.
•
•
Modified the show cfs application example with output that shows which
applications support CFS distribution over IP and Fibre Channel and those
that support only CFS distribution over Fibre Channel.
Added status keyword.
Replaced with
vsan fctimer
Application field in the command output.
IP Address
172.22.46.223 [Local]
172.22.46.233
172.22.46.225
172.22.46.222
Chapter 22
for the fctimer application in the
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Show Commands