Releasing The Cfs Session Lock; Verifying The Ntp Configuration - Cisco Nexus 7000 Series Configuration Manual

Releasing the CFS Session Lock

Releasing the CFS Session Lock
If you have performed an NTP configuration and have forgotten to release the lock by either committing or
discarding the changes, you or another administrator can release the lock from any device in the network.
This action also discards pending database changes.
Procedure
Step 1
Step 2

Verifying the NTP Configuration

To display the NTP configuration, perform one of the following tasks:
Command
show ntp access-groups
show ntp authentication-keys
show ntp authentication-status
show ntp internal
show ntp logging-status
show ntp peer-status
show ntp peers
show ntp rts-update
show ntp source
show ntp source-interface
show ntp statistics {io | local | memory | peer
{ipaddr {ipv4-addr | ipv6-addr} | name peer-name}}
show ntp trusted-keys
show running-config ntp
Use the clear ntp session command to clear the NTP sessions.
Use the clear ntp statistics command to clear the NTP statistics.
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
64
Command or Action
switch# configure terminal
switch(config)# clear ntp session
Purpose
Enters global configuration mode.
Discards the NTP configuration changes in the
pending database and releases the CFS lock.
Purpose
Displays the NTP access group configuration.
Displays the configured NTP authentication keys.
Displays the status of NTP authentication.
Displays internal NTP information.
Displays the NTP logging status.
Displays the status for all NTP servers and peers.
Displays all the NTP peers.
Displays the RTS update status.
Displays the configured NTP source IP address.
Displays the configured NTP source interface.
Displays the NTP statistics.
Displays the configured NTP trusted keys.
Displays NTP information.
Configuring NTP