System Hap-Reset - Cisco MDS 9000 series Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

system hap-reset

To configure the HA reset policy, use the system hap-reset command in EXEC mode. Use the no form
of this command to disable this feature.
Syntax Description
This command has no arguments or keywords.
Defaults
Enabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
You can disable the HA policy supervisor reset feature (enabled by default) for debugging and
troubleshooting purposes.
Examples The following example enables the supervisor reset HA policy.
switch# system hap-reset
OL-8413-07, Cisco MDS SAN-OS Release 3.x
system hap-reset
system no hap-reset
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
system hap-reset
21-83