System Hap-Reset - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

system hap-reset

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
system hap-reset
To configure the HA reset policy, use the system hap-reset command in EXEC mode. Use the no form
of this command to disable this feature.
Syntax Description This command has no arguments or keywords.
Defaults
Enabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines You can disable the HA policy supervisor reset feature (enabled by default) for debugging and
troubleshooting purposes.
Examples The following example enables the supervisor reset HA policy.
switch# system hap-reset
Cisco MDS 9000 Family Command Reference
21-106
system hap-reset
system no hap-reset
Modification
This command was introduced.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x