Match Ip Address - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

match ip address

To distribute any routes that have a destination IP network number address that is permitted by a standard
access list, an expanded access list, or a prefix list, use the match ip address command. To remove the
match ip address entry, use the no form of this command.
Syntax Description prefix-list prefix-list-name...
Command Default
No prefix lists are specified.
Command Modes
Route-map configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
An ellipsis (...) in the command syntax indicates that your command input can include multiple values
for the prefix-list-name argument.
Like matches in the same route map subblock are filtered with "or" semantics. If any one match clause
is matched in the entire route map subblock, this match is treated as a successful match. Dissimilar match
clauses are filtered with "and" semantics, so dissimilar matches are filtered logically. If the first set of
conditions is not met, the second match clause is filtered. This process continues until a match occurs or
there are no more match clauses.
Use route maps to redistribute routes.
Use the route-map global configuration command and the match and set route-map configuration
commands to define the conditions for redistributing routes from one routing protocol into another. Each
route-map command has a list of match and set commands associated with it. The match commands
specify the match criteria—the conditions under which redistribution is allowed for the current
route-map command. The set commands specify the set actions—the particular redistribution actions
to perform if the criteria enforced by the match commands are met. The no route-map command deletes
the route map.
The match route-map configuration command has multiple formats. The match commands can be given
in any order, and all match commands must pass to cause the route to be redistributed according to the
set actions given with the set commands. The no forms of the match commands remove the specified
match criteria.
OL-27852-01
match ip address {prefix-list prefix-list-name [prefix-list-name...]}
no match ip address {prefix-list prefix-list-name [prefix-list-name...]}
Modification
This command was introduced.
Distributes routes based on a prefix list. The prefix list name can be
any alphanumeric string up to 63 characters. The ellipsis indicates
that multiple values can be entered, up to 32 prefix lists.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
match ip address
233