Processing Example Of Shielded Cables; Connections Of Fg Wire And Each Shielded Cable; Assembling Of Connector (A6Con1) - Mitsubishi Electric QD77MS User Manual

[Processing example of shielded cables]

Connections of FG wire and each shielded cable

Assembling of connector (A6CON1)

Chapter 4 Installation, Wiring and Maintenance of the Product
Remove the covering from all shielded cables and bind
the appeared shield with a conductive tape.
Coat the wire with
insulating tape.
4 - 13
Solder the shield of any one of the
shielded cables to the FG wire.
Wrap the coated parts
with a heat contractile
tube.