Parameter processing of a device station
The processing is to read and save the parameters from the device station, and to write the saved parameters to the device
station.
Also, it automatically sets parameters of the device station from the master station. (Page 51 Device station parameter
automatic setting)
Navigation window "Parameter" "Module Information" Target module "Module Parameter (Network)" "Basic
Settings" "Network Configuration Settings"
Select and right-click the device station, and select "Parameter of Device Station" to display the "Parameter of Device Station"
window.
In this manual, "slave station" is described as "device station".
5 PARAMETER SETTINGS
5.5 "CC-Link IE TSN Configuration" Window
5
113