Compatibility With Multiple Cpu System - Mitsubishi Electric QD77MS User Manual

(b) Mounting to a MELSECNET/H remote I/O station
No. of modules
Applicable
network module
QJ72LP25-25
QJ72LP25G Max. 64 modules
QJ72BR15
REMARK
The basic model QCPU cannot configure the MELSECNET/H remote I/O network.

(2) Compatibility with multiple CPU system

When using the QD77MS in a multiple CPU system, refer to the QCPU User's
Manual (multiple CPU system).
(3) Programming tool
The applicable programming tool's versions of the QD77MS are shown below.
(For the applicable programming tool's versions of the CPU module, refer to the
"QCPU User's Manual (Hardware Design, Maintenance and Inspection)".)
QD77MS2
QD77MS4
QD77MS16
REMARK
QD77MS cannot be supported with GX Developer, GX Configurator-QP and
MR Configurator.
Use GX Works2 and MR Configurator2 to use QD77MS.
Main base unit of
(Note-1)
remote I/O station
(Note-1): Within the I/O point range of network module only.
(Note-2): It can be installed in any of the I/O slots of installable base unit.
GX Works2
Version 1.77F or later
2 - 9
Chapter 2 System Configuration
(Note-2)
Base unit
Extension base unit of
remote I/O station
: Installation possible, : Installation not possible
Version
MR Configurator2
Version 1.09K or later