Component List - Mitsubishi Electric QD77MS User Manual

2.2 Component list

No. Part name
Simple Motion
1
module
2 Personal computer
3 RS-232 cable
4 USB cable
5 Ethernet cable
6 Servo amplifier
Manual pulse
7
generator
SSCNET
8
(Note-1)
cable
External input signal
9
(Note-1)
cable
(Note-1): The cables for connecting between the Simple Motion module and servo amplifiers. Refer to each servo amplifier instruction
manual for details.
[SSCNET cable]
MR-J3BUS_M
(Standard cord for inside
panel)
MR-J3BUS_M-A
(Standard cable for outside
panel)
MR-J3BUS_M-B
(Long distance cable)
_= Cable length
(015: 0.15m (0.49ft.), 03: 0.3m (0.98ft.), 05: 0.5m (1.64ft.), 1: 1m (3.28ft.), 3: 3m (9.84ft.), 5: 5m (16.40ft.), 10: 10m
(32.81ft.), 20: 20m (65.62ft.), 30: 30m (98.43ft.), 40: 40m (131.23ft.), 50: 50m (164.04ft.) )
The positioning system using the Simple Motion module is configured of the following
devices.
Type
QD77MS2
QD77MS4
QD77MS16
Personal
computer which (Prepared by user)
supports Refer to the "GX Works2 Version1 Operating Manual (Common)" for details.
Windows
R
(Prepared by user)
An RS-232 cable is needed for connecting the CPU module with a personal
QC30R2
computer.
Refer to the "GX Works2 Version1 Operating Manual (Common)" for details.
(Prepared by user)
A USB cable is needed for connecting the CPU module with a personal
–
computer.
Refer to the "GX Works2 Version1 Operating Manual (Common)" for details.
(Prepared by user)
An Ethernet cable is needed for connecting the CPU module with a personal
–
computer. Refer to the "GX Works2 Version1 Operating Manual (Common)"
for details.
(Prepared by user)
–
(Prepared by user)
Recommended: MR-HDP01 (Manufactured by Mitsubishi Electric
–
Corporation)
(Prepared by user)
Cables are needed for connecting the Simple Motion module with a servo
–
amplifier, or between servo amplifiers.
(Prepared by user)
Cables are needed for connecting the Simple Motion module with an external
device.
–
(Prepare them referring to the manuals for the connected devices and
information given in 3.4.2 of this manual.)
Model name
MR-J3BUS015M
MR-J3BUS03M
MR-J3BUS05M
MR-J3BUS1M
MR-J3BUS3M
MR-J3BUS5M-A
MR-J3BUS10M-A
MR-J3BUS20M-A
MR-J3BUS30M-B
MR-J3BUS40M-B
MR-J3BUS50M-B
QD77MS
Number of control axes
MS: SSCNET
Cable length [m(ft.)]
0.15 (0.49)
0.3 (0.98)
0.5 (1.64)
1 (3.28)
3 (9.84)
5 (16.40)
10 (32.81)
20 (65.62)
30 (98.43)
40 (131.23)
50 (164.04)
2 - 4
Chapter 2 System Configuration
Remarks
(/H)model
Description
• Simple Motion module
MR-J4(W)-B/MR-JE-B/MR-J3(W)-B
• MR-J4(W)-B/MR-JE-B/MR-J3(W)-B
MR-J4(W)-B/MR-JE-B/MR-J3(W)-B