Mark Detection Data Axis No. - Mitsubishi Electric QD77MS User Manual

Setting value
0 Current feed value
1 Machine feed value
2 Real current value
3 Servo input axis current value
6 Synchronous encoder axis current value
Synchronous encoder axis current value per
7
cycle
Current value after composite main shaft
8
gear
9 Current value per cycle after main shaft gear
Current value per cycle after auxiliary shaft
10
gear
11 Cam axis current value per cycle
Cam axis current value per cycle (Real
12
(Note)
position)
[Pr.803] Mark detection data axis No.
Set the axis No. of data that latched at mark detection.
[Pr.802] Mark detection data type
Data name
(Note): Cam axis current value per cycle that considered delay of the servo system.
If a value other than the above is set, the warning "Outside mark detection data
axis No. setting range" (warning code: 132) occurs and the target mark detection
is not available.
[Pr.804] Mark detection data buffer memory No.
Set the No. of optional 2 words buffer memory that latched at mark detection.
Set this No. as an even No.
If a value other than the above is set, the warning "Outside mark detection data
buffer memory No. setting range" (warning code: 133) occurs and the target mark
detection is not available.
Unit
-1 -5
10 [µm], 10 [inch],
-5
10 [degree], [PLS]
Synchronous
encoder axis
position unit
Main input axis
position unit
Cam axis cycle unit
14 - 48
Chapter 14 Common Functions
[Pr.803] Mark detection data axis No.
QD77MS2 QD77MS4 QD77MS16
1 to 2 1 to 4
801 to 804
1 to 2 1 to 4
1 to 16
1 to 16