Paper Feeding System - Toshiba e-STUDIO 2555C Service Manual

3.11 Paper Feeding System

3.11.1 General Descriptions
This chapter explains how the system works to pick up paper from the drawer or bypass tray and
transport it to the 2nd transfer position.
The paper feeding system mainly consists of the feed roller, registration roller, bypass paper sensor
(S16), drawer empty sensor (S5), feed sensor (S20), registration sensor (S19) and drive system for
these components. The paper feeding/developer unit drive motor (M2) drives the above rollers.
[1]
[15]
[1] Drawer
[2] Feed sensor
[3] Registration sensor
[4] Registration roller
[5] Registration pass sensor
[6] Bypass feed roller
[7] Bypass feed sensor
[8] Bypass tray
[9] Bypass separation roller
[10] Separation roller (drawer)
[11] Paper feed roller (drawer)
[12] Drawer detection switch
[13] Drawer empty sensor
[14] Drawer paper width detection switch
[15] Drawer paper length detection switch
[16] Pickup roller
[17] Jam access cover opening/closing switch
[18] Drawer paper remaining sensor
[19] Drawer tray-up sensor
[20] Transport roller
[21] 2nd drawer paper feed sensor
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
[5]
[4]
[3]
[2]
[14] [18] [13] [19] [16]
Fig. 3-34
3 - 55
[7]
[6]
[9]
[8]
[17]
[20]
[21]
[11]
[10] [12]
e-STUDIO2555C/3055C/3555C/4555C/5055C
OUTLINE OF THE MACHINE
3