Dlss_T Display Of Lock Out Station – Number – Telephone Number - NEC Univerge SV8500 Operation And Maintenance Manual

DLSS_T: Display of Lock Out Station – Number – Telephone Number
1. Functional Outline
This command is used to print out stations in lockout state, by using Telephone Numbers. This command is only
available at NCN (for FCCS network).
2. Parameters
Input Data
TYPE:
UGN:
Start TELN:
End TELN:
This parameter is valid when Type =Printout of lockout stations by tenant is selected.
Note 1:
This parameter is valid when Type =Printout of lockout stations within a specified range of station
Note 2:
numbers is selected.
Output Data
FPC:
TN:
Start STN:
End STN:
CNT:
UGN:
TELN:
LENS:
Buttons
Get:
Exit:
Printout of all lockout stations
Printout of lockout stations by tenant
Printout of lockout stations within a specified range of station number
User Group Number
First Telephone Number (maximum 16 digits)
Last Telephone Number (maximum 16 digits)
Fusion Point Code (1-253)
Tenant Number
First Physical Station Number
(a maximum of five digits for a Business system, and six digits for a Hotel system)
Last Physical Station Number
(a maximum of five digits for a Business system, and six digits for a Hotel system)
Count
User Group Number
Telephone Number (maximum 16 digits)
Line Equipment Number
Get information on the lockout status.
Exit this command.
CHAPTER 7
– 819 –
Maintenance Commands
,
Note 1 Note 2
Note 2
Note 2