3-2. BRACKET (MOTOR) ASSY
1 Two screws
(BVTT 3x6)
3-3. HOLDER ASSY
Slider assembly
Shaft A
1 When removing, move the slider assembly
in the arrow direction, and check that shaft
A is at the position shown in the figure.
3 Connector (CN198 : HMOT board)
4 Bracket (Motor) assembly
2 Two screws
(BVTT 3x6)
3 Remove the four screws (BVTT 3x6), and
remove the four collars (dampers) and four
compression springs.
— 27 —
2 Connector
(CN198 :
HMOT board)