Show Processes Cpu (C-Series And E-Series) - Dell Force10 S4810P Reference Manual

show processes cpu (C-Series and E-Series)

View CPU usage information based on processes running in the system.
C-Series, E-Series
Syntax show processes cpu [cp | rp1 | rp2] [lp [linecard-number [1-99]
| all | summary]
Parameters
cp
rp1
rp2
lp
lp all
lp summary
Command Modes
Command History
Version 7.5.1.0
Version 7.4.1.0
Version 6.5.1.0
Usage In the example below, the CPU utilization for the last five seconds is 4%/2%. The first number
Information (4%) is the CPU utilization for the last five seconds. The second number (2%) indicates the
percent of CPU time spent at the interrupt level.
Example (cpu)
FTOS#show processes cpu
CPU Statistics On CP Processor
===============================
CPU utilization for five seconds: 4%/2%; one minute: 2%; five
minutes: 2%
PID
0xd02e4e8 1498633 89918
0xd9d4c70
164
(OPTIONAL) Enter the keyword cp to view CPU usage of the control
processor.
(OPTIONAL) Enter the keyword rp1 to view CPU usage of the Route
Processor 1.
(OPTIONAL) Enter the keyword rp2 to view CPU usage of the Route
Processor 2.
linecard [ 1-99 ]
(OPTIONAL) Enter the keyword lp followed by the line card number
to display the CPU usage of that line card.
The optional 1-99 variable sets the number of tasks to display in
order of the highest CPU usage in the past five (5) seconds.
(OPTIONAL) Enter the keyword lp all to view CPU utilization on all
active line cards.
(OPTIONAL) Enter the keyword lp summary to view a summary of the
line card CPU utilization.
• EXEC
• EXEC Privilege
Introduced on the C-Series.
Added the lp all option.
The granularity of the output for rp1 and rp2 is changed. The output
is at the process level so process-specific statistics are displayed.
Runtime(ms) Invoked uSecs 5Sec
0
NOTE: This option is supported on the E-Series only.
16666 3.00% 2.67% 2.67% 0
0 0 0.00% 0.00% 0.00% 0
1Min 5Min TTY Process
KP
tLogTask