Ssh-Peer-Stack-Unit; Telnet - Dell Force10 S4810P Reference Manual

Parameters
-l
Defaults Not configured.
Command Modes
Command History
Version 8.1.1.0
Version 7.5.1.0
Version 6.3.1.0
Usage This command is not available when the peer RPMs are running different FTOS releases.
Information

ssh-peer-stack-unit

Open an SSH connection to the peer RPM.
S-Series, Z-Series
Syntax ssh-peer-stack-unit [-l username]
Parameters
-l
Defaults Not configured.
Command Modes
Command History
Version 8.3.11.1
Version 8.3.11.1

telnet

Connect through Telnet to a server. The Telnet client and server in FTOS support IPv4 and IPv6 connections.
You can establish a Telnet session directly to the router or a connection can be initiated from the router.
username
(OPTIONAL) Enter the keyword -l followed by your user name.
Default: The user name associated with the terminal.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
username
(OPTIONAL) Enter the keyword -l followed by your user name. The
default is the user name associated with the terminal.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S-Series.
193