Show Hardware System-Flow - Dell C9000 Series Reference Manual

statistics=NULL
EID 0x00000bff: gid=0x5,
slice=6, slice_idx=0x1, part =0 prio=0xbff, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
Stage
InPort
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
InPorts
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
SrcMac
Offset: 89 Width: 48
DATA=0x00000000 08000100
MASK=0x0000ffff ffffffff
action={act=DropCancel, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics=NULL

show hardware system-flow

This command displays hardware system-flow information.
C9000 Series
Syntax
show hardware system-flow {cp-switch | linecard slot-id port-set
port number | pe pe-id stack-unit unit–number port-set port-pipe-
id } counters
Parameters
cp-switch
linecard slot-id
pe peid
stack-unit unit-
number
Enter the keyword cp-switch to display the counters for
control traffic on the control plane.
Enter the linecard slot-id parameters to identify the line
card on which you want to clear system-flow statistics. The
range of slot IDs is from 0 to 11.
Enter the keyword pe and the port extender (PE) ID to display the
counters for a specified PE. The PE ID ranges is from 0 to 255.
NOTE: The pe option is only visible when the extended
bridge feature is enabled.
Enter the keyword stack-unit and unit number to display the
counters for the specified stack-unit. The stack unit range is from
0 to 7.
Debugging and Diagnostics 795