Security Commands
enable web https access-profile
enable web https access-profile [none | <access-profile>] port <port
number>
Description
Allows HTTPS access on the specified (non-default) port.
Syntax Description
none
Specifies to not to use an access profile when accessing HTTPS.
access-profile
Specifies the name of an access profile to use when accessing HTTPS.
port number
Specifies the port number to use to access HTTPS.
Default
N/A
Usage Guidelines
Use this command to set up an access profile for a particular port number to restrict HTTPS usage.
Example
The following example enables HTTPS access using the access-profile named secure_web on slot 1, port
2:
enable web https access-profile secure_web port 1:2
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e; it was added to
the "i" series of switches in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
1052
ExtremeWare 7.7 Command Reference Guide