Renault Laguna III Manual page 3131

Specialised bodywork tools: Use
USING TOOL Car. 1765 FOR REMOVING THE
DASHBOARD CROSS MEMBER
a Use this tool as indicated in the dashboard removal
procedure.
a Fit the Car. 1765 as far as the stop (1) .
a Screw the rod (2) onto the tool body (1) as far as the
stop.
a Firmly lock tool body in the same way as a lock nut
against the dashboard cross member nut while hold-
ing hexagon bolt.
GENERAL INFORMATION
101308
112407
a Unscrew the whole tool as far as the stop and tight-
en it gently (during this operation, the beam nut,
which has a left-hand thread, screws into the beam
and disengages it from the A-pillar).
a Hold the tool body (1) and unlock the rod (2) .
a Unscrew dashboard cross member rod to remove
the tool.
WARNING
To maintain the adjustment of the dashboard
cross member and make refitting easier, undo
the lock nut or the index on one side.
40A-1
40A
112410
112408