Installation And Setup - Avaya DECT R4 Installation And Administration Manual

The document also includes information about the daily operations of creating and sending
messages, which can be done by any user in the system.
For example, in order to simplify an installation, use the following steps:

Installation and setup

For installation and basic configuration, refer to chapters
●
- Installation and configuration
- Configuration and AIWS setup Wizard
Charger installation
Follow the instructions in the chapter for the charger.
Recommended work flow for telephone installation
The recommended work flow depends on what type of telephones that are used.
DECT telephones when adding new telephones
●
DECT telephones when telephone is up and running
●
Recommended work flow when adding new DECT telephones
1. Install and configure AIWS, see
2. Create a template with settings common for all devices at the site, see
parameter template
3. Add a range of Numbers to the site, see
template.
4. Connect the telephone to AIWS. The telephone is shown as Online (
view.
5. In the Numbers view, right click and associate the Number, see
a device
6. Register the telephone in the PBX
Recommended work flow for DECT telephones that are up and running
1. Install and configure AIWS, see
2. Connect the telephones to the AIWS. When connected, the Numbers are shown as Online
( ) in the Device Manager.
3. Right click on the entries and Save.
Avaya DECT R4 - Installation and Maintenance Guide
on page 405.
on page 414.
on page 365
on page 366
Installation and configuration
Creating new numbers
Installation and configuration
Introduction
on page 365.
Creating a
on page 410. Run the
) in the Devices
Associating a number with
on page 365.
02/2016
363