Avaya DECT R4 Installation And Administration Manual page 343

1. Click the Devices tab.
2. From the Device menu, select Add device.
3. Select device type and parameter version.
4. Enter a Device ID for the device, manually or by using a bar code reader.
5. The Continuous registration check box can be used to select whether the Create
devices dialog shall close after clicking Create or if it shall still be open.
6. Click the Create button.
7. Repeat 4 to 6 if more devices are to be created.
Assign a Number
It is possible to assign a Number to a device that has not yet been assigned a Number in
WinPDM.
Note:
Assign should not be done on a device that already has a Number.
Note:
1. Click the Devices tab.
2. Select the device that should be assigned a Number.
3. From the Devices menu, select Assign number.
4. In the Assign number to device window, enter a new prefix (optional) and a new Number
5. Click the OK button.
Enter/Edit Description of a Device
1. It is possible to enter information of a device using WinPDM. For example, the description
can be used to describe a location of a device.
2. Click the Devices tab.
3. Select the device which to edit the description for.
4. From the Device menu, select Enter description.
5. Enter an appropriate description and click the OK button to save the setting.
Factory Reset
Factory reset means that the device parameters will be set to factory default settings. The
Number in the database that is associated with the device will not be affected.
Note:
The device must be online.
Note:
Avaya DECT R4 - Installation and Maintenance Guide
Operation
343
02/2016