Avaya DECT R4 Installation And Administration Manual page 345

Note:
If the wanted device type and/or parameter version is not found in the list,
Note:
WinPDM needs to be updated with new parameter definition files, see
Parameter Definition Files
4. In the Edit Template window, select the parameters to be saved in the template by
selecting the check box to the left of each parameter. Change the parameters to the
desired values.
5. Click the OK button.
Create a Parameter Template from a Number
It is also possible to create a template from a number in the WinPDM. This can be used to save
settings in the template that later on can be applied to other numbers.
1. Click the Numbers tab.
2. Select the number which settings to be used as template.
3. From the Template menu, select Use as template.
4. Enter a name for the template.
5. Click the OK button.
When creating a template based on a number, a Select drop-down list is shown in the bottom
left corner. This setting decides which parameters that shall be copied from the device. If All
parameters is selected, the synchronization time will be longer.
6. Select the parameters to be saved in the template by selecting the check box to the left of
each parameter. Change the parameters to the desired values
It is also possible to create a template from a device that is online but not stored in the
database. The template will contain all parameters for the device except for those that are
Number specific.
Rename a Template
1. Click the Templates tab.
Avaya DECT R4 - Installation and Maintenance Guide
on page 348.
Operation
Import
345
02/2016