Replacement Of The Telephone With The Pdm - Avaya DECT R4 Installation And Administration Manual

2. Insert the telephone into a desktop charger or rack charger connected to AIWS/AIWS2
(not needed if an over the air connection is used). Navigate to the Numbers tab in AIWS/
AIWS2 Device Manager.
The new telephone now has the same User ID as the old telephone. It will automatically be
synchronized and data and parameter settings from the old telephone will be transferred to
the new telephone.
The synchronization will take a while if the Contacts in the original telephone contains a
large number of contacts.
Telephone replacement with AIWS/AIWS2, Scenario 2
1. Make a note of the IPDI of the new telephone. It is found by pressing *#06# on the
telephone.
2. Insert the new telephone into a desktop charger or rack charger connected to the AIWS/
AIWS2 and navigate to the Numbers tab in the Device Manager in AIWS/AIWS2.
3. Select the old telephone in the list and make a right-click. Click Associate with device....
Select the device with an IPDI that matches your new telephone from the list that appears.
The new telephone is automatically synchronized and all data and parameter settings will
be transferred to the new telephone.
The synchronization will take a while if the Contacts in the original telephone contains a
large number of contacts.
4. Subscribe the new telephone.

Replacement of the telephone with the PDM

To see which data that is replaced during this process, see
transfer on page 214.
Both the old telephone and the new telephone must be of the same device type. The same
extension number will be assigned to the new telephone.
The new telephone should not be subscribed towards the PBX yet.
1. Perform a factory reset, see
has been previously used.
2. Make sure that the old telephone is saved in the PDM by starting PDM and navigating to
the Numbers tab. There shall be a tick in the Saved column for the old telephone.
If the telephone is not saved, insert it into an Advanced Charger or Rackmount Charger
connected to the PDM and perform a save.
Avaya DECT R4 - Installation and Maintenance Guide
Performing a Factory reset
Data included in a replacement
on page 210, if the new telephone
Maintenance
215
02/2016