Avaya DECT R4 Installation And Administration Manual page 496

Installing and operating the AIWS and the AIWS2
Note:
If an upper and/or lower limit for the Call ID range is set messages using an
Note:
Alias / Call ID will not be sent anymore. The Alias value will not pass the limit
check in this case.
User login required (No or Yes)
●
Sets whether a login is required for NetPage. If a Unite CM module is used as "User
Server", users configured in the Unite CM can also log in. This parameter shall be set to no
for the default GUI (index3). If index4 is used, the Message History section must be
included. Refer to
Automatic logout when idle (minutes)
●
Sets how long a user can be idle before being logged out. To prevent automatic logout,
leave this field empty. If the parameter User login required is set to No, leave this field
empty.
Messaging rights. Choose between Call ID range and User rights to determine how
●
NetPage shall verify Call IDs.
Call ID range means that Call IDs are verified according to the Call ID range limit settings.
This setting shall always be used for systems without theUnite CM module.
User rights means that Call IDs are verified according to the settings in the Unite CM
module. This requires that the parameter User login required is set to Yes.
Number list source. Choose between Local and Unite CM users.
●
This is the Number list that is used in NetPage. In systems without an Unite CM, this
parameter shall always be set to Local.
Default GUI (Applicable to the AIWS2 only). Select which GUI to use as start page for
●
NetPage. Choose between Index 1, Index 2, Index 3, Index 4 that are hard coded page
layouts and the "Custom" which refers to the index.html in the ftp netpage area.
See Customizing the user interface (GUI)
different GUIs.
Note:
Changing the setting of the defaul GUI requires a refresh (F5) of the netpage in
Note:
your browser.
Creating or updating the number list
In the NetPage default GUI (index.html), a number list can be accessed by clicking the Search
button. Before the number list can be used, the entries have to be added.
The number list entries can be created from any CSV file, using Microsoft Excel or any leading
spreadsheet or relational database application.
For AIWS2 it is possible to import maximum 3000 entries via the CSV file.
The CSV file is uploaded/pasted with the Number list upload program (included in NetPage)
as described below.
496
Avaya DECT R4 - Installation and Maintenance Guide
Customizing the user interface (GUI) on page 482.
on page 482 for more information on the
02/2016