Installing And Operating The Advanced Charger; Introduction - Avaya DECT R4 Installation And Administration Manual

Installing and operating the Advanced
Charger

Introduction

This chapter describes how to install, configure and operate the Advanced Charger. It is an
advanced charger equipped with a USB port, making it possible to connect it directly to a PC for
the purpose of upgrading or configuring the Advanced Charger itself or a cordless telephone
placed in the charger. The Advanced Charger also has two Ethernet ports, enabling upgrading
and configuring over a LAN of a cordless telephone placed in the charger.
The USB port is used to connect the Advanced Charger to a PC running the Portable Device
Manager (PDM). This program can be used to upgrade the software and to configure
parameters in the Advanced Charger as well as in a cordless telephone placed in the Advanced
Charger.
The USB port is used when the Advanced Charger is connected to a PC running thePortable
Device Manager (PDM). The PDM or the Avaya In-Building Wireless Server (AIWS) can be
used to upgrade the software and to configure parameters in the Advanced Charger as well as
in a telephone placed in the Advanced Charger.
The Advanced Charger supports easy replacement, that is replacement of a faulty telephone
via the telephone display and does not involve PDM or AIWS.
Figure 58: Advanced Charger
Advanced Charger for 3720/3725
The Ethernet ports makes it possible to connect several Advanced Chargers to the same LAN.
Avaya DECT R4 - Installation and Maintenance Guide
Advanced Charger for 3740/3749
269
02/2016