Man-Down Alarm And No-Movement Alarm - Avaya DECT R4 Installation And Administration Manual

Configuring Avaya DECT phones
Mode for automatic call after alarm - The call can be established in the following modes:
●
Off: No call will be established.
●
Normal: The call is established as an ordinary call.
●
Loudspeaking: The loudspeaker on the backside of the handset is turned on.
●
For additional parameter settings, see
Calling a predefined number without sending alarm
You can configure the Push-button to automatically dial a number after alarm number without
sending an alarm. Example of configuration:
1. Select Alarm > Common.
2. In the Number for automatic call after alarm field, enter the number to be dialed.
3. Select Alarm > Alarm on long press.
4. In the Alarm type for long press drop-down list, select Not used.
5. In the Mode for automatic call after alarm drop-down list, select one of the following:
Normal: The call is established as an ordinary call.
●
Loudspeaking: The loudspeaker on the backside of the telephone is turned on.
●
This configuration makes it possible to long press the Push-button to dial the number without
sending an alarm. However, the Push-button alarm can be configured to send an alarm by
pressing it twice. See Alarm type for multiple press in

Man-down alarm and No-Movement alarm

Note:
This feature is applicable for Avaya 3749 telephone only.
Note:
Man-down alarm
No-movement alarm
1. The accuracy is +/- 10 %
In a template or Number in PDM/AIWS, the parameters for activation are found at Alarm >
Man-down and No-movement alarm.
The alarms can also be activated in the telephone. For more information, see User Manuals for
the corresponding telephones. Parameters in the current version are:
234
Avaya DECT R4 - Installation and Maintenance Guide
Common alarm settings
Push button alarm
If the telephone is tilted 45º (default) or more for a preset
time (default 7 seconds), the Man-down alarm
triggered.
If no movement is detected during a preset time (default
30 seconds), the No-movement alarm will be triggered.
on page 233.
on page 233.
1
will be
02/2016