Avaya DECT R4 Installation And Administration Manual page 575

Rear mounted single (requires reverse 19 " rack")
1. Fasten the big assembly bracket on the right side of the module and the small assembly
brackets on the left side, as shown in the figure below.
Figure 199: Rear Mounted single 1
2. Fasten the assembly brackets in the rack, see below (screws not included)
Rear mounted double (requires the reverse 19" kit)
1. Use the supplied assembly brackets and mount the two modules together, both on the
rear side and on the bottom side, see figure below.
2. Use the two small reverse assembly brackets and fasten one on the right rear side and
the other on the left rear side.
Figure 200: Rear Mounted double
Avaya DECT R4 - Installation and Maintenance Guide
Installing the Elise 3 Server (AIWS2 Hardware)
575
02/2016