Avaya DECT R4 Installation And Administration Manual page 120

Installing and operating the IPBS and IPBL
Figure 36: Configuring Kerberos client
1. Ensure that the IP address of an NTP time server is specified. Select General > NTP.
2. Select General > Admin.
Note:
Ensure that the password policy is configured in the Admin page because an
Note:
upgrade from earlier releases might not include valid default settings.
3. In the Authentication Servers section, select the Realm/Domain field and enter the realm
name specified in the Kerberos server.
4. In the Address field, enter the IP address of the Kerberos server. In the Kerberos server,
enter 127.0.0.1 (localhost) as the IP address. The values in the Port text field fill by default.
5. Click OK.
To enable delegated authentication using the Kerberos server, each client must join the
Kerberos realm of the server. To join the realm:
120
Avaya DECT R4 - Installation and Maintenance Guide 02/2016