Security - Avaya DECT R4 Installation And Administration Manual

Installing and operating the Advanced Charger
Charger IP port
Service Discovery Enabled
Service Discovery Domain
DH IP address (one DH only)
DH IP port
1. Currently only "auto" setting is available
2. The IP address is only valid if DHCP Enabled is set to "No".
Note:
It may be necessary to import the parameter definitions file that is included in the
Note:
software package.
Follow this instruction to set Advanced Charger parameters:
1. Check that the Advanced Charger is connected to PDM/AIWS.
2. In PDM or the device manager in AIWS, click on the Numbers tab.
3. Select the Advanced Charger device that you want to change parameters for.
4. In the Number menu, click Edit....
5. Edit the parameters you want to edit.
6. Click OK.
Advanced Charger does not appear in AIWS
If the Advanced Charger does not appear in the AIWS Device Manager, the Service Discovery
might not be working in the customers network setup.
In this case connect the Advanced Charger to PDM and edit the following parameters:
Service Discovery Enabled: No
●
DH IP address (one DH only): Enter AIWS IP-Address
●
Note:
Service Discovery might not work if the Advanced Charger is not in the same
Note:
subnet as the AIWS.

Security

(information regarding software security)
N/A
274
Avaya DECT R4 - Installation and Maintenance Guide
12346 (default)
Yes (default), No
Name of domain
192.168.0.3 (default)
10147 (default)
02/2016