Moving A License From Elise 2 Server (Aiws Hardware) To The Elise 3 Server (Aiws2 Hardware) - Avaya DECT R4 Installation And Administration Manual

3. Change the license key (of the Elise 2) restored on the Elise 3 with the licenses key that
needs to be used for Elise 3 module. If the License type of the Elise 3 is not the same as
used on Elise 2 you can move the license by exchanging the module key of the modules,
Refer Moving a license from Elise 2 Server (AIWS Hardware) to the Elise 3 Server (AIWS2
Hardware) on page 595.
Moving a license from Elise 2 Server (AIWS Hardware) to the Elise
3 Server (AIWS2 Hardware)
A license for a product on Elise 2 server can, if the license is compatible with Elise 3, be moved
to the EliSE 3 by moving the Module key from the Elise 2 module to the Elise 3 module.
For example, the UniteCM and Mobile Monitoring Gateway (MMG) are compatible products.To
make it easier to differ between the Module Keys, the marking "2M" is added on the label on a
Module Key from Elise 3.
Note:
All functions will be the same as they were in Elise 2. Only one ethernet port
Note:
(LAN1) can be used.
1. Create a backup of your configuration on the Elise 2 module.
2. Remove the four screws on the back side of the Elise 3 module.
3. Slide the metal cover backwards.
4. Remove the Module Key from the Elise 2 module.
5. Replace the Module Key on the Elise 3 with the one from Elise 2.
Avaya DECT R4 - Installation and Maintenance Guide
Maintenance information for the AIWS2
595
02/2016