AIWS factory reset
There is no general factory reset procedure available on the AIWS. You manually need to go to
the AIWS advanced configuration (AIWS start page - configuration - other settings - advanced
configuration), check all the settings and press the "factory" button if available to reset the
setting to default.
Device management
●
Phone book
●
remote management (remote connection, open ports and serial port channels)
●
general settings
●
IP-Dect
●
device handling (portable devices, desktop chargers, advanced chargers)
●
message distribution (Alarm, Mobile Data, Location and Availability info)
●
UNS (operating mode)
●
User server
●
logging (status log, system activity log, advanced parameters)
●
Time settings
●
Security web access
●
password policy
●
passwords needs to be changed/reset manually (sysadmin user/password needs to be
●
known)
network
●
license
●
A work around is to install the image again on the AIWS flash card, see
Compact Flash
network parameters. Of course you should not restore a AIWS backup file afterwards.
What to consider when replacing a module
Refer to Installing Elise 2 Server,
to find information about:
Address
●
Jumpers
●
Switches
●
Avaya DECT R4 - Installation and Maintenance Guide
on page 550. This will clear all settings to default including the license key and
General information
Avaya In-Building Wireless Server (AIWS)
Replacement of the
on page 527 and
Installation
on page 532
703
02/2016