Avaya DECT R4 Installation And Administration Manual page 468

Installing and operating the AIWS and the AIWS2
Figure 148: The UNS Alias / Call ID configuration page.
3. Enter settings for UNS Alias / Call ID.
In this example, a message that is addressed to MyAlias will be sent to the handset with
telephone number 1234 in the IP-DECT system that is connected to the AIWS with the
address 192.168.0.1.
4. Click Activate.
Logging
Status information can be stored locally, but can also be sent to a central log. The System
Activity Log can store activities such as messages, alarms, faults, input/output activities, etc.
Activity logging is useful for troubleshooting. The default status and system activity logs are
stored locally but they can also be sent to another Unite module.
A Unite CM is needed for Activity Logging.
Note:
See
Note:
1. Click Configuration on the start page. The Configuration page appears.
2. Select Other Settings > Advanced Configuration in the left menu in the AIWS
Configuration page. The Advanced Configuration page appears.
3. Under Other, click Logging The Log settings page appears.
Figure 149: The Log settings page.
4. Click Status Log, System Activity Log or View Advanced parameters.
468
Avaya DECT R4 - Installation and Maintenance Guide
Export activity logs to a Syslog server .
on page 454
02/2016