Avaya DECT R4 Installation And Administration Manual page 568

Installing Elise 3 Server (AIWS2 Hardware)
** also used if the Power parameter conflicts with the actual setup.
Label for IP address/Host name
To facilitate future support and access to the module, the module's IP address or Host name
can be printed on a blank label and attached to the module as shown in the figure below.
The blank label is found on the back side of the Getting started and Safety document:
"Elise 3 – EMBEDDED LINUX SERVER INCLUDING SAFETY INSTRUCTIONS", included in
the delivery.
Figure 193: Label for IP Address/Host name
568
Avaya DECT R4 - Installation and Maintenance Guide 02/2016