Closing The Device Manager - Avaya DECT R4 Installation And Administration Manual

When a single AIWS is used, the Automatically enable new devices function should normally be
enabled. When Device Management is distributed over multiple AIWS in a system, the function
shall be disabled. If the function is enabled, devices will be enabled and saved on all AIWS
running device management. This will cause synchronization problems and the logged in
devices will consume license positions on each AIWS. See also
page 369.
To disable automatic saving of new numbers:
1. In the Options menu, click Preferences. The Preferences window appears.
Figure 131: The Preferences window.
2. In the Preferences window, clear the Automatically enable new devices check box.
3. Click OK.

Closing the Device Manager

In the File menu, click Exit. The Device Manager shuts down.
Avaya DECT R4 - Installation and Maintenance Guide
Device Manager
Multiple AIWS configuration
02/2016
on
439