Avaya DECT R4 Installation And Administration Manual page 581

Accessing the Elise 3 Server (AIWS2 Hardware) through the network
Avaya recommends that the Elise 3 Server (AIWS2 Hardware) module should always be
assigned the same IP address if it communicates with other equipment, to prevent it from losing
contact with the equipment after a restart. You can inform the network administrator about the
MAC address and reserve a fixed IP address for the Elise 3 Server (AIWS2 Hardware) through
the DHCP server.
Write the IP address on the blank label, found on the back side of the Getting Started and
Safety document and attach the label on the front side to facilitate future access.
See Label for IP address/Host name
Note:
If NetBIOS is enabled in the network, the address elise-XXXXXXXX can be used
Note:
when accessing the module via the network, where XXXXXXXX is the module
key number. The module key number can be found on the license certificate or on
the label on the back of the module.
Browser requirements to access Elise 3
Windows® Internet Explorer® (versions: 8.0 or 9.0)
●
Mozilla Firefox® (versions: 3.6 up to 12.0)
●
Java applets have to be enabled for messaging status and Device Management.
●
1. Connect the module to the LAN.
2. Open the web browser and enter the modules IP address or elise-XXXXXXXX, where
XXXXXXXX is the module key number (leading zeros can be excluded). The module key
number can be found on the license certificate or on the label on the back of the module.
3. Continue with the basic configuration steps, See
Accessing the Elise 3 Server (AIWS2 Hardware) through the management
port (USB)
The management port can be used when Elise 3 Server (AIWS2 Hardware) does not have a
valid and unique IP address, when the IP address has changed or the Elise 3 Server (AIWS2
Hardware) is moved from one network to another. The management port gives access to the
module without having access to the customer's network.
Figure 207: Connection through the Management port
Avaya DECT R4 - Installation and Maintenance Guide
Installing the Elise 3 Server (AIWS2 Hardware)
on page 568
Basic configuration on page 586.
581
02/2016