Avaya DECT R4 Installation And Administration Manual page 188

Installing and operating the IPBS and IPBL
For a description of the attributes, see the table below.
Attribute
Time
Type
Code
Severity
Remote
Source
Description
Performance
It is possible to check different performance parameters. For a description of the parameters,
see the table below.
Parameter
CPU
CPU-R
188
Avaya DECT R4 - Installation and Maintenance Guide
Description
The date and time when the alarm, error is issued or
cleared.
The status of the fault. It has four possible states:
Alarm - Alarms displayed in red are active alarms
●
Alarm cleared - The alarm is already cleared
●
Alarm timeout - The alarm exceeded the timeout
●
period
Error - Refers to faults that are not active for a
●
specific time.
A unique number that identifies the alarm. Click the code
to get more detailed information about the alarm.
It has three possible states:
Critical - Immediate action is required. It is
●
displayed, for example, if a managed object goes
out of service.
Major - Urgent action is required. It is displayed,
●
for example, if the capability of the managed
object is severely degraded.
Indeterminate - Level of severity cannot be
●
determined
The IP Address of the object that reported the alarm.
Click the IP address to access the object.
The software module that reported the alarm. Together
with the code it uniquely identifies an alarm.
A textual description of the alarm.
Description
Shows CPU utilization
Shows utilization of CPU resources allocated by different
tasks
02/2016