Avaya DECT R4 Installation And Administration Manual page 82

Installing and operating the IPBS and IPBL
Fixing the mounting bracket to a ceiling
To fix a base station to a ceiling, follow the same method as for fixing to a wall. For more
information, see
above a suspended ceiling, ensure that the front of the base station points downwards.
Fixing the mounting bracket to a pole or beam
To fix the mounting bracket to a pole (diameter ¡Ý 45 mm) or a beam (wider than 50 mm), use a
strap or flexible metal band less than 30 mm wide. The strap or flexible metal band is not
included in the box.
1. Fix the mounting bracket to a pole or beam using the metal band, see
Figure 18: Fixing the mounting bracket to a pole or beam
82
Avaya DECT R4 - Installation and Maintenance Guide
Fixing the mounting bracket to a wall
Tied wrongly
on page 81. To position the base station
figure 18.
02/2016