Avaya DECT R4 Installation And Administration Manual page 132

Installing and operating the IPBS and IPBL
Enter Port number in the Port text field. The IPBS/IPBL is by default administered
●
over the network via the TCP port 80 (http). If you cannot use port 80, set up another
port for access.
Set this value to 0 to disable http traffic (recommended). Attempts to contact the
device using the http protocol will result in an Unable to connect message.
Enter HTTPS Port in the HTTPS Port text field. To access IPBS/IPBL securely, use the
●
TCP port 443 (https). Set this value to anything except zero (0) to enable https traffic.
The default value is 443. The value zero (0) disables https traffic which is not
recommended.
Enter Network Base Address / Network Base Mask in the Allowed stations text
●
fields to allow access only from matching network, for example:172.16.0.0/255.255.0.0
In the Active HTTP sessions field, you can see all the ongoing HTTP traffic.
●
2. Click OK.
Configuring the HTTP Client settings
You can specify the list of URLs that require authentication.
1. Select General > HTTP Client.
2. Enter the URL in the URL text field.
3. Enter User and Password in the User and Password text fields.
4. Click OK.
The system displays a new row in which you can add more URLs.
SNMP
To report faults in the IP-DECT system, use the Simple Network Management Protocol (SNMP).
The SNMP framework has three parts:
An SNMP manager: For the system to control and monitor the activities of network hosts
●
using SNMP.
An SNMP agent: The software component within the managed device that maintains data
●
for the device and reports data, as needed, to managing systems.
A MIB: A virtual information storage area for network management information.
●
The agent and MIB reside on a network device, for example, router, access server, or switch. To
enable the SNMP agent on the IPBS, define the relationship between the manager and the
agent.
132
Avaya DECT R4 - Installation and Maintenance Guide 02/2016