Avaya DECT R4 Installation And Administration Manual page 184

Installing and operating the IPBS and IPBL
Note:
If this operation is interrupted, the firmware in the device will be defect. If a
Note:
firmware upload is for any reason interrupted, the firmware must be uploaded
again. Do not execute a reset before the firmware upload is complete. For
information on how to load new firmware if the IPBS/IPBL is unreachable through
the web GUI,see Troubleshooting
1. Select Update > Firmware.
2. Click Browse... and browse to the firmware file.
3. Click Upload
4. Reset in order to make the changes take effect, see
Updating the Boot file
1. Select Update > Boot.
2. Click Browse... and browse to the boot file.
3. Click Upload.
4. Reset in order to make the changes take effect, see
Updating the RFPs
This section applies only to the IPBL.
The firmware can be updated. Follow the steps below to update RFP. Download firmware from
the IP-DECT system provider. In the RFP status list, information on connected RFPs is
displayed.
1. Select Update > RFPs.
2. Click Browse.. and browse to the RFP update file.
3. Click Upload.
184
Avaya DECT R4 - Installation and Maintenance Guide
IP-DECT Base Station (IPBS)
Reset on page 190.
Reset on page 190.
on page 676.
02/2016