Avaya DECT R4 Installation And Administration Manual page 419

2. Select the device you want to delete. The selected row is highlighted.
3. In the Devices menu, select Delete or right click and select Delete.
4. Click Yes in the Delete Device dialogue.
The dialogue closes and the device is deleted from the list.
Note:
You cannot delete a device that is online.
Note:
Replacing a device
Note:
This feature is not applicable for fixed devices.
Note:
If a device shall be replaced with a new device, it is possible to transfer its associated Number
including settings to a new device. The new device must be of the same device type as the old
one.
1. If the device to be replaced is still working, make sure that it is synchronized.
2. Shut off the old device or make a factory reset.
3. Connect the new device to the Device Manager.
4. Associate the new device to the Number associated to the old device according to the
instructions in
be associated with the old device.
Note:
The subscription data will not be copied by this mechanism, so a handset needs
Note:
to be subscribed to the IP-DECT system additionally.
Adding a new device
Note:
This feature is not applicable for fixed devices.
Note:
It is possible to enter several new Device ID's in advance into Device Manager for later
association.
In order to simplify input when handling many devices, it is possible to use a bar code reader.
The bar code reader should send a carriage return after each item, but it is not necessary. If
carriage return is not sent, it is necessary to click Create after each read item.
1. Select the Devices tab.
2. In the Device menu, select Add device. The Create devices dialogue opens.
Avaya DECT R4 - Installation and Maintenance Guide
Associating a number with a device on page 414. The Number will no longer
Device Manager
419
02/2016