Demonstration Mode - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2
Figure 98: The Create Self Signed Certificate page.
4. On the Create Self Signed Certificate page, enter valid parameters for your certificate
file. Validity and Common name are mandatory.
Due to security reasons, some characters in the ASCII-table are not allowed to use
in the fields Common Name, Organization Unit, Organization, Locality, State or
Province and Country when creating a certificate.
Among these are: [, ], (, ), {, }, $, &, \, |, *, ", `, ', ?, ~, >, <, ^, \n, \r.
5. Click on Create Certificate. A certificate file is saved and the web server is restarted.

Demonstration Mode

Demonstration Mode makes it possible to run the product for two hours with almost full
functionality of the application.
The Demonstration Mode can be set from the application's Configuration page or manually by
using the Mode button. The module will automatically return to previous licence and parameters
(without restart) after 2 hours.
The Demonstration Mode is indicated by the Status LED with yellow slow flashing light. If any
application encounters problems during Demonstration Mode, the Status LED will however
show red slow flashing light instead. The Mode button LED shows blue fixed light.
386
Avaya DECT R4 - Installation and Maintenance Guide 02/2016