6. Enter the long name.
7. Enter a short user name.
Note:
Use this field is used for logging in.
Note:
8. Enter a password.
9. Confirm the password.
10. Click OK.
Viewing and modifying a User Administrator
1. Log in as System Administrator. See
2. Select Administration > Users.
3. Click Show.
The browser displays a two-part list page. The upper part displays the user administrator
accounts and the lower part displays the user accounts.
4. In the User Administrators section, click on a hyperlink below the Long Name heading.
The browser displays a detail window.
5. Select/Edit any of the following settings as required:
Long Name
●
Name
●
Note:
Use this field is used for logging in.
Note:
Password
●
Confirm Password
●
6. Click OK.
Deleting a User Administrator
1. Log in as System Administrator. See
2. Select Administration > Users.
3. Click Show.
4. In the User Administrators section, click on a hyperlink below the Long Name heading.
The browser displays a details window.
5. Click on Delete.
The User Administrator is deleted and the details window is closed.
Avaya DECT R4 - Installation and Maintenance Guide
Logging in as System Administrator
Logging in as System Administrator
Configuration
on page 102.
on page 102.
105
02/2016