Avaya DECT R4 Installation And Administration Manual page 470

Installing and operating the AIWS and the AIWS2
Auto DST adjust
●
Date format
●
Date separator
●
Time Format
●
Time push time
●
For additional information, see also
Setting time
If Web browser has been selected as time source, the time must be set manually. Otherwise
this setting shall not be done.
1. Under Time, click Set time The Set Date and Time page appears.
2. Stop time counting by clicking on the approriate button on the right side.
Figure 151: The Set Date and Time page.
3. Enter date and time. Click Submit time.
Date and time can also be set in the Setup wizard.
Changing power supply parameter
This chapter is for AIWS2 only, please refer to chapter
page 577.
470
Avaya DECT R4 - Installation and Maintenance Guide
Installing Elise 2 Server (AIWS Hardware)
Changing power supply parameters
on page 523.
on
02/2016