Chapter 3
Installation
Module Setup Main Menu
M-ACCF
<CR>
Refresh the screen
0.
Return to Previous Menu
-----------------------------------
1. Reset the Module
2. Software Download ...
3. Set Primary Version ...
4. Set Factory Defaults
5. Create Report
6. Clear Mac Address Table
7. Configuration Copy
8. ATM IP Configuration ...
>>>Enter your choice:
The module Setup Main Menu lists the various categories of M-ACC configurable
parameters. You have the 8 options listed above.
ATM IP Configuration
Option 8 from the Main Menu 'ATM IP Configuration', allows you to show and set
the IP Configuration of the ATM entity of the M-ACC.
ATM IP Configuration Menu
-------------------------
0. Return to Previous Menu
1. Set
2. Show IP Configuration
Please enter your choose:2
Assigning the M-ACC module IP address, Gateway and Netmask:
1
Select Option 1 "Set IP Configuration"
2
Check that the LED labelled OPR, on the ATM access module front panel is ON.
3
Type the IP address, net mask and default gateway of the ATM access module
when prompted.
46
Setup Main Menu
S/W Version: 4.0.7
IP Configuration
IP Address
Netmask
---------------
---------------
149.49.54.249
255.255.255.0
Avaya M770 M-ACCF/SF ATM Access Modules User's Guide
Slot #: 5
Default Gateway
---------------
149.49.54.1