Create Numbers And Apply Template - Avaya DECT R4 Installation And Administration Manual

Installing and operating the Portable Device Manager (WinPDM)
5. When all needed parameters have been configured, click the OK button to save the
settings.

Create Numbers and Apply Template

This section describes how to create numbers to be associated with the devices later on. In
addition, the common settings will also be applied to the numbers through the template you
created earlier.
1. Click the Numbers tab.
2. From the Number menu, select New.
3. In the Device type drop-down list, select which device type the number(s) is created for.
4. In the Parameter version drop-down list, select the same parameter version used when
you created the template for your device type.
5. In the Template drop-down list, select which template to be applied to the number(s).
6. In the Prefix field, enter the prefix (if needed) to be added to the number(s).
7. Select one of the following options:
To create a single number, select the Single option and enter the number.
●
Note:
To create a range of numbers, select the Range option. Enter the start number
Note:
and end number.
NOTE: The maximum range that can be added at a time is 100 numbers.
8. Click the OK button.
324
Avaya DECT R4 - Installation and Maintenance Guide
Red Value not valid
Turquoise The value differs from the default value
02/2016