Open Access Protocol (Oap) - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2

Open Access Protocol (OAP)

OAP is a protocol that applications can use to communicate with other connected systems, for
example the Cordless Telephone System. The client communicates with an OAP Server. The
protocol is XML based and is sent to the OAP Server over the LAN using a TCP connection.
This feature requires an additional licence, see
For more information, such as a Function Description, please contact your system
administrator.
Configuration
The Message Distribution lists for the different interfaces have to be configured to send the
information to the OAP Server, in order to give the client access to the information. The address
of the OAP Server is xxx.xxx.xxx.xxx/OAP.
Configuration example
The DECT Interface should be configured to send User Data to the OAP Server.
1. Open the AIWS Configuration pages and select Other Settings > Advanced
Configuration. Under DECT Interface, select Message Distribution.
2. Click on Alarm, see
Figure 166: Setting up the Message Distribution list for the DECT Interface to send
information to the OAP Server
3. Enter the address xxx.xxx.xxx.xxx/OAP in one of the address fields. Click on the Activate
button.
504
Avaya DECT R4 - Installation and Maintenance Guide
Licenses
figure 166 on page 504.
on page 361.
02/2016