Editing Parameters - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2
Parameter transfer between a device and the Device Manager
When a device is connected, it is synchronized with the associated Number in the Device
Manager, see
Note:
When parameters have been edited and the device is synchronized, only the
Note:
edited parameters will be sent to the device.

Editing Parameters

The Edit Parameters popup window shows the set of parameters relevant to the Number that
is being edited. The parameter groups are organized in a tree structure in the left pane, with the
parameters in the current node in the right pane. The parameter list has one column with the
parameter name, and another column gives the parameter value. This can be for example a
numerical value, a boolean value, or text. Clicking in the
of the selected parameter.
1. Select the Numbers tab. The Number view appears.
2. Select the Number. The selected row is highlighted.
3. Click Edit in the Number menu. Alternatively, right-click and choose Edit, or double-click
on the Number.
The Edit Parameters for <Number> window opens, where <Number> is the ID of the
current Number.
4. Select parameter in the left pane.
5. Make your changes on the Value row.
When a parameter has been edited, the name of the node to which the parameter belongs
changes to a blue color.
(Click Cancel if you want to undo all parameters edited since your last save and return to
the main window.)
6. Click OK to save your changes.
Note:
If the Handset is used on an Integral system only the sound and alert settings for:
Note:
- - Vibrating alert: on, off
- - key sound: click, tone, silent
- - ring type: normal short silent
will be valid. Other settings are ignored. This is also valid when configuring profiles.
412
Avaya DECT R4 - Installation and Maintenance Guide
Synchronizing a device on page 418.
column will give a short description
02/2016